Re-roofing FAQs · The re-roof process
Can you put a new steel roof over an old one?
Not usually, on a profiled steel roof. The NZ Metal Roofing Code of Practice says it's not acceptable to lay a new roof over existing underlay unless that underlay is in "as new" condition. In practice, the old sheets come off first.
Why the old steel comes off
- Underlay. Bulletin BU01 says existing underlay should be replaced and recommends one layer, because doubling up can trap water vapour in the roof space.
- Fixings. BRANZ says screws need 30 mm of penetration into timber purlins. Nobody can check that through old sheets.
- What's underneath. BRANZ says homes built before the 1960s may have no underlay, damaged framing, or a roof already laid over an older one. Keep that in mind on an older Hamilton villa or bungalow.
If a quote goes over the top, ask what happens to the underlay, how the framing gets checked, and whether the steel manufacturer's warranty allows it. Get the answers in writing.
Does going over the top save money?
It avoids strip-off labour and disposal. But old underlay and any hidden damage stay under the new roof, where they're harder to fix later.
Written by the CTR Roofing team, Hamilton. Updated November 2026.
