Re-roofing FAQs · The re-roof process
Do I need new roofing paper when I replace a steel roof?
Usually, yes. Roofing paper, or underlay, sits under the sheets. NZ Metal Roofing Manufacturers' Bulletin BU01 says existing underlay should be replaced on a profiled metal re-roof, and the Code of Practice only allows laying over it if it's in "as new" condition.
What to look for
- One layer. BU01 recommends no more than one layer, because doubling up can trap water vapour in the roof space.
- Absorbent. BRANZ says all profiled metal roofing needs an absorbent underlay.
- The right type. The Code of Practice recommends a synthetic, self-supporting, fire-retardant underlay for houses. Horizontal underlay needs support unless both edges sit on purlins.
To check yours, look up from inside the roof space with a torch. BRANZ says missing or damaged underlay shows from there, and homes built before the 1960s may have none at all. Then make sure your quote names the underlay.
Can I add insulation while the roof is off?
Yes. BRANZ lists adding or replacing insulation as one of the opportunities a re-roof gives you, including in skillion roofs that are otherwise hard to reach.
Written by the CTR Roofing team, Hamilton. Updated November 2026.
